1NASA Goddard Space Flight Center, Tin (and Other Metal) Whisker Induced Failures.

2Compton KG, Mendizza A, Arnold SM (1951) “Filamentary Growths on Metal Surfaces-Whiskers”. Corrosion 7: 327-334.

3Galyon TG(2005) “Annotated Tin Whisker Bibliography And Anthology”, IEEE Trans. Electron. Pack Manuf 28: 94-122.

4Chason E, Jadhav N, Pei F, Buchovecky E, and Bower A (2013) “Growth Of Whiskers From Sn Surfaces: Driving Forces and Growth Mechanisms”. Proc. Surf. Sci 88:103-131.

5Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment, Official Journal of the European Union, 2003, L 37/19.

6Ciocci R, Pecht MR, Ganesan S (2006) “Lead-free Electronics: Overview,” in Lead-free Electronics, S. Ganesan and M. Pecht, John Wiley, Hoboken 1-44.

7NASA Engineering and Safety Center (2017) “Technical Support to the National Highway Traffic Safety Administration (NHTSA) on the Reported Toyota Motor Corporation (TMC) Unintended. Acceleration (UA) Investigation”.

8U.S. Food and Drug Administration (1986) “Tin Whiskers Problems, Causes and Solutions”.

9U.S. Food and Drug Administration (2017) MAUDE - Manufacturer and User Facility Device Experience.

10Puttlitz KJ, Stalter KA (2004) Handbook of Lead-Free Solder Technology for Microelectronic Assemblies. Marcel Dekker.

11Tan AC (1993) “Report by Department of Health, Education, and Welfare Public Health Service, Food and Drug Administration, “Tin Whiskers Problems, Causes and Solutions, no. 42, March 1986.Tin and Solder Plating in the Semiconductor Industry,” Chapman and Hall London.

12Dunn BD (1976) “Whisker formation on Electronic Materials. Circuit World 2:32-40,

13Barnes J (2017) Bibliography for Whiskers.

14Pinol LA, Melngailis J, Charles HK, Lee DM, Deacon R, Coles G, Clatterbaugh G (2011) “Influence of Tin Deposition Methods on Tin Whisker Formation”, IEEE Trans. Compon. Packag. Manuf. Technol 1: 2028-2032.

15Yen YW, Li CK, Tsou MY, Shao PS (2011) “Substrate Shape Effect on the Tin Whisker Growth in The Electroplating Matte Sn System”. Jpn. J. Appl Phys 50: 7-4.

16Sobiech M, Krüger C, Welzel U, Wang JY, Mittemeijer EJ, et al.(2010) “Evolution of Microstructure and Stress of And Associated Whisker Growth on Sn Layers Sputter-Deposited on Cu Substrates”, J. Mater. Res 25: 2166-2174.

17Vicenzo A, Bonelli S, Cavallotti PL (2010) “Pulse Plating of Matt Tin: Effect on Properties”., Trans. Inst. Met. Finish 88: 248-255.

18Dimitrovska A and Kovacevic R (2010) “Environmental Influence on Sn Whisker Growth,” IEEE Trans. Electron. Packag. Manuf 33:193-197.

19Jadhav N, Buchovecky EJ, Reinbold L, Kumar S, Bower AF, et al (2010) “Understanding the Correlation Between Intermetallic Growth, Stress Evolution, And Tin Whisker Nucleation”, IEEE Trans. Electron. Packag. Manuf 33:183-192.

20Chason E, Jadhav N, Pei F (2011) “Effect of Layer Properties on Stress Evolution, Intermetallic Volume, And Density During Tin Whisker Formation”, JOM 63:62–67.

21Pei F, Jadhav N, Chason E (2012) “Correlating Whisker Growth and Grain Structure on Sn–Cu Samples by Real-Time Scanning Electron Microscopy and Backscattering Diffraction Characterization”. Appl. Phys. Lett 100: 221902.

22Dimitrovska A, Kovacevic R (2009) “The Effect of Micro-alloying of Sn Plating on Mitigation of Tin whisker Growth”. J. Electron. Mater 38: 2726.

23Jadhav N Wasserman J, Pei F, Chason E (2012) “Stress Relaxation in Sn-Based Films: Effects of Pb Alloying, Grain Size, And Microstructure”. J Electron Mater 41: 588-595.

24Boettinger WJ, JohnsonCE, Bendersky LA, Moon KW, Williams ME, et al (2005) “Whisker and Hillock Formation on Sn, Sn–Cu and Sn–Pb Electrodeposits”. Acta Mater 53: 5033–5050.

25Yu CF, Chan CM, Hsieh KC (2010) “The Effect of Tin Grain Structure on Whisker Growth”, Microelectron. Reliab 50:1146–1151.

26Mathew S, Osterman M, Pecht M, Dunlevey F (2009) “Evaluation of Pure Tin Plated Copper Alloy Substrates for Tin Whiskers”. Circuit World 35:3–8.

27Okamoto N, Fujii Y, Kurihara H, Kondo K (2008) “Effects of Microstructure of Deposited Sn Films and Orientation Index of Cu Foils on Tin Whisker Formation Using Substitutionally-Deposited Sn Films”. Mater. Trans 50: 2570–2577.

28Kao HJ, Wu WC, Tsai ST, Liu CY (2006) “Effect of Cu additives on Tin whisker formation of Sn (Cu) finishes”. J. Electron. Mater 35:1885–1891.

29Moon KW, Kim SK, Williams ME, Boettinger WJ, Stafford GR (2010) “Effect of Current Density and Electrolyte Concentration on Hillock Growth from Pure Bright Sn Electrodeposits”. J. Appl. Electrochem 40:1671-1681.

30Dimitrovska A and Kovacevic R (2009) “Mitigation of Tin Whisker Growth by Composite Ni/Sn Plating”, J. Electron. Mater 38: 2516.

31Cheng J, Yang FQ, Vianco PT, Zhang B, Li JCM (2011) “Optimum Thickness of Sn Film for Whisker Growth”. J. Electron. Mater 40: 2069-2075.

32Lu MH, Hsieh KC (2007) “Sn–Cu Intermetallic Grain Morphology Related to Sn Layer Thickness”. J. Electron. Mater 36 1448–1454.

33Pitt CH, Henning RG (1964) “Pressure-Induced Growth of Metal Whiskers”., J. Appl. Phys 35:1448-1454.

34Shibutani T, Yu Q, Shiratori M, Pecht MG (2008) “Pressure-Induced Tin Whisker Formation”. Microelectron. Reliab 48:1033-1039.

35Xu C, Zhang Y, Fan CL, Abys JA (2005) “Driving Force for The Formation of Tin Whiskers: Compressive Stress – Pathways for Its Generation and Remedies for Its Elimination and Minimization”, IEEE Trans. Electron. Packag. Manuf 28:31-35.

36Bozack MJ, Crandall ER, Rodekohr CL, Dean RN, Flowers GT, et al (2010) “High Lateral Resolution Auger Electron Spectroscopic (AES) Measurements for Tin Whiskers on Brass”, IEEE Trans. Electron. Packag. Manuf 33:198-204.

37Murakami K, Okano M, Hino M, Takamizawa M, Nakai K (2010) “Mechanism of Generation and Suppression of Tin Whiskers on Tin and Tin–Lead Plated Films”, Mater. Trans 51:143-151.

38Lin SK, Yorikado Y, Jiang JX, Kim KS, Saganuma K, Tsujimoto M, et al (2007) “Mechanical Deformation- Induced Tin Whiskers Growth on Electroplated Films in The Advanced Flexible Electronic Packaging”. J. Mater. Res 22:1975-1986.

39Chen YJ, Chen CM (2009) “Mitigative Tin Whisker Growth Under Mechanically Applied Tensile Stress”. J. Electron. Mater 38: 415–419.

40Yang FQ, Li Y (2008) “Indentation-Induced Tin Whiskers on Electroplated Tin Coatings”. J. Appl. Phys. 104:113512.

41Dudek MA, Chawla N (2010) “Nanoindentation of Rare Earth–Sn Intermetallics in Lead-Free Solders”. Intermetallics 18:1016-102.

42Williams JJ, Chapman NC, Chawla N (2013) “Mechanisms of Sn Hillock Growth in Vacuum by In Situ Nanoindentation in a Scanning Electron Microscope (SEM)”. J. Electron. Mater 42:224–229.

43Kim KS, Yu CH, Yang JM (2006) “Tin Whisker Formation of Lead-Free Plated Lead Frames”. Microelectron. Reliab 46:1080-1086.

44Nakadaira Y, Jeong S, Shim J, Seo J, Min S, et al. (2008) “Growth of Tin Whiskers for Lead-Free Plated Lead Frame Packages in High Humid Environments and During Thermal Cycling”, Microelectron. Reliab 47:1928-1949.

45Suganuma k, Baated A, Kim KS, Hamasaki K, Nemoto N, et al. (2011) “Tin Whisker Formation of Lead-Free Plated Lead Frames During Thermal Cycling”. Acta Mater 59: 7255-7267.

46Lee BZ, Lee DN (1998) “Spontaneous Growth Mechanism of Tin Whiskers”. Acta Mater 46:3701-3714.

47Chason E, Jadhav N, Chan WL, Reinbold L, Kumar KS (2008) “Whisker Formation in Sn And Pb–Sn Coatings: Role of Intermetallic Growth, Stress Evolution, And Plastic Deformation Processes”. Appl. Phys. Lett 92: 17.

48Sobiech M, Welzel U, Mittemeijer EJ, Hugel W (2008) “Driving Force For Tin Whisker Growth In The System Cu-Sn,” Appl. Phys. Lett 93 011906-1- 011906-3.

49Britton SC, and Clarke M (1964) “Effects of Diffusion from Brass Substrates into Electrodeposited Tin Coatings on Corrosion Resistance and Whisker Growth,” in Proc. 6th Int. Metal Finishing Conf 205-211.

50Pei F, Jadhav N, Chason E (2012) “Correlation Between Surface Morphology Evolution and Grain Structure: Whisker/Hillock Formation in Sn-Cu”. JOM 64:1176-1183.

51Choi WJ, Lee TY, Tu KN, Tamura N, Celestre RS, et al (2003) “Tin Whiskers Studied by Synchrotron Radiation Scanning X-Ray Micro-Diffraction”. Acta Mater 51:6253-6261.

522006) iNEMI Recommendations on Lead-Free Finishes for Components Used in High-Reliability Products (Version 4).

53Osterman M (2002) “Mitigation Strategies for Tin Whiskers”. CALCE EPSC, University of Maryland.

54Fang T (2005) Dissertation on “Tin Whiskers Risk Assessment Studies”. University of Maryland, College Park.

55Arnold SM (1956) “The Growth and Properties of Metal Whiskers”. Tech. Proc. 43rd Annual Conv Am. Electroplating Soc. 26-31.

56Arnold SM (1959) “The Growth of metal Whiskers on Electrical Components”. Proc. of the IEEE Elec. Comp. Conference 75-82.

57Arnold SM (1966) “Repressing the Growth of Tin Whiskers”. Plating 53:96–99.

58Glazunova VK and Kudryavstev NT (1963) “An Investigation of the Conditions of Spontaneous Growth of Filiform Crystals on Electrolytic Coatings,” translated from Zhurnal Prikladnoi Khimii 36:543-550.

59Sandes E, Williams ME, Vaudin MD, and Stafford GR (2007) “Equi-axed grain formation in Electrodeposited Sn-Bi. Journal of Electronic Materials.

60Rozen M (1968) “Practical Whisker Growth Control Methods,” Plating 55:1155-1168.

61Britton SC (1974) “Spontaneous growth of whiskers on tin coatings: 20 years of observation”. Trans. Inst. Metal Finishing 52: 95-102.

62Telcordia GR78-Core (1997) “Physical Design and Manufacture of Telecommunication Products”.

63Leidecker H and Kadesch J (2000) “Effects of Uralane Conformal Coating on Tin Whiskers Growth.” Proceedings of IMAPS Nordic, The 37th IMAPS Nordic Annual Conference 108-116:10-13.

64Pinsky DA (2017) “Enhancements to Current Tin Whisker Risk Assessment Methods”, Reliability Analysis Laboratory®, Tin Whisker Algorithms, Raytheon Integrated Defense Systems.

65Okada S, Higuchi S, Ando T (2003) “Field Reliability Estimation of Tin Whiskers Generated by Thermal-Cycling Stress”. Murata Manufacturing Corporation, Ltd.

66Fang T, Mathew S, Osterman M, and Pecht M (2007) "Assessment of Risk Resulting from Unattached Tin Whisker Bridging". Circuit World 33:5-8.

67Osterman M (2017) "Mitigation Strategies for Tin Whiskers", Whitepaper CALCE EPSC.

68Brusse J, Ewell G, and Siplon JP (2002) "Tin Whiskers: Attributes and Mitigation". in Proc. Capacitor and Resistor Technology Symp (CARTS) 25-29.

69Puttlitz K, Stalter KA (2004) “Handbook of Lead-Free Solder Technology for Microelectronic Assemblies”. Marcel Dekker Publisher, New York, NY

70(2005) JEDEC Solid State Technology Association. “Measuring Whisker Growth on Tin and Tin Alloy Surface Finishes". JESD22A121.01.

71JESD201 (2017) “Environmental Acceptance Requirements for Tin Whisker Susceptibility of Tin and Tin Alloy SurfaceFinishes”.