1Gratton DGAquilino SA (2004) Interim restorations. Dent Clin North Am 48:487-497.
2Givens EJ, Jr., Neiva G, Yaman P, et al (2008) Marginal adaptation and color stability of four provisional materials. J Prosthodont 17: 97-101.
3Vahidi F (1987) The provisional restoration. Dent Clin North Am 31:363-381.
4Christensen GJ (1996) Provisional restorations for fixed prosthodontics. J Am Dent Assoc 127:249-252.
5Comisi JC (2015) Provisional materials: advances lead to extensive options for clinicians. Compend Contin Educ Dent 36: 56-59.
6Kurtzman GStrassler H (2006) Provisional fixed restorations. Dental Economics 3 (suppl) 1-12.
7Jo LJ, Shenoy KKShetty S (2011) Flexural strength and hardness of resins for interim fixed partial dentures. Indian J Dent Res 22:71-76.
8Strassler HE (2009) In-office Provisional Restorative Materials for Fixed Prosthodontics: Part 1-polymeric Resin Provisional Materials. Inside Dentistry.
9Koumjian JHNimmo A (1990) Evaluation of fracture resistance of resins used for provisional restorations. J Prosthet Dent 64:654-657.
10Barszczewska-Rybarek IM (2009) Structure-property relationships in dimethacrylate networks based on Bis-GMA, UDMA and TEGDMA. Dent Mater 25:1082-1089.
11Floyd CJDickens SH (2006) Network structure of Bis-GMA- and UDMA-based resin systems. Dent Mater 22:1143-1149.
12Sideridou I, Tserki VPapanastasiou G (2002) Effect of chemical structure on degree of conversion in light-cured dimethacrylate-based dental resins. Biomaterials 23:1819-1829.
13Moszner N, Fischer UK, Angermann J, et al (2008) A partially aromatic urethane dimethacrylate as a new substitute for Bis-GMA in restorative composites. Dent Mater 24:694-699.
14Haselton DR, Diaz-Arnold AMVargas MA (2002) Flexural strength of provisional crown and fixed partial denture resins. J Prosthet Dent 87: 225-228.
15Ireland MF, Dixon DL, Breeding LC, et al (1998) In vitro mechanical property comparison of four resins used for fabrication of provisional fixed restorations. J Prosthet Dent 80:158-162.
16Ireland MF, Dixon DL, Breeding LC, et al (1998) In vitro mechanical property comparison of four resins used for fabrication of provisional fixed restorations. J Prosthet Dent 80:158-162.
17Lang R, Rosentritt M, Behr M, et al (2003) Fracture resistance of PMMA and resin matrix composite-based interim FPD materials. Int J Prosthodont 16:381-384.
18Nejatidanesh F, Momeni GSavabi O (2009) Flexural strength of interim resin materials for fixed prosthodontics. J Prosthodont 18: 507-511.
19Rosentritt M, Behr M, Lang R, et al (2004) Flexural properties of prosthetic provisional polymers. Eur J Prosthodont Restor Dent 12:75-79.
20Takamizawa T, Barkmeier WW, Tsujimoto A, et al (2015) Mechanical Properties and Simulated Wear of Provisional Resin Materials. Oper Dent 40:603-613.
21Kim KH, Ong JLOkuno O (2002) The effect of filler loading and morphology on the mechanical properties of contemporary composites. J Prosthet Dent 87:642-649.
22Knobloch LA, Kerby RE, Pulido T, et al (2011) Relative fracture toughness of bis-acryl interim resin materials. J Prosthet Dent 106:118-1125
23Watanabe H, Khera SC, Vargas MA, et al (2008) Fracture toughness comparison of six resin composites. Dent Mater 24:418-425.
24Gale MSDarvell BW (1999) Thermal cycling procedures for laboratory testing of dental restorations. J Dent 27:89-99.
25Balkenhol M, Michel K, Stelzig J, et al (2009) Repairability of cross-linked biopolymers. J Dent Res 88:152-157.
26Chen HL, Lai YL, Chou IC, et al (2008) Shear bond strength of provisional restoration materials repaired with light-cured resins. Oper Dent 33:508-515.
27Hagge MS, Lindemuth JSJones AG (2002) Shear bond strength of bis-acryl composite provisional material repaired with flowable composite. J Esthet Restor Dent 14:47-52.
28Shim J, Park Y, Manaloto A, et al (2014) Shear bond strength of four different repair materials applied to bis-acryl resin provisional materials measured 10 minutes, one hour, and two days after bonding. Oper Dent 39:E147-153.
29Balkenhol M, Meyer M, Michel K, et al (2008) Effect of surface condition and storage time on the repairability of temporary crown and fixed partial denture materials. J Dent 36:861-872.
30Wang RL, Moore BK, Goodacre CJ, et al (1989) A comparison of resins for fabricating provisional fixed restorations. Int J Prosthodont 2:173-184.
31Ozcan M, Alander P, Vallittu PK, et al (2005) Effect of three surface conditioning methods to improve bond strength of particulate filler resin composites. J Mater Sci Mater Med 16:21-27.
32Tuna EB, Rohlig BG, Sancakli E, et al (2013) Influence of acrylic resin polymerization methods on residual monomer release. J Contemp Dent Pract 14:259-264.
33Anusavice K, Shen CRawls H Phillips’ (2012) Science of Dental Materials. (12thedn). St. Louis: Saunders 143-150.
34Rinastiti M, Ozcan M, Siswomihardjo W, et al (2010) Effect of biofilm on the repair bond strengths of composites. J Dent Res 89:1476-1481.
35Koin PJ, Kilislioglu A, Zhou M, et al (2008) Analysis of the degradation of a model dental composite. J Dent Res 87:661-665.
36Costa TR, Ferreira SQ, Klein-Junior CA, et al (2010) Durability of surface treatments and intermediate agents used for repair of a polished composite. Oper Dent 35:231-237.
37Vallittu PK, Lassila VPLappalainen R (1994) Wetting the repair surface with methyl methacrylate affects the transverse strength of repaired heat-polymerized resin. J Prosthet Dent 72:639-643.