1T. Prosek, A. Nazarov, H. B. Xue, S. Lamaka, D. Thierry (2016) “Role of steel and zinc coating thickness in cut edge corrosion of coil coated materials in atmospheric weathering conditions; Part 1: Laboratory study”, Progress in Organic Coatings 99:356-364.

2A.J.Stavros “Continuous Hot Dip Coatings”, Metals Handbook, American Soc. of Metals 13:432-434.

3S Feliu, V Barranco (2003) “XPS study of the surface chemistry of conventional hot-dip galvanised pure Zn, galvanneal and Zn–Al alloy coatings on steel”, Acta Materialia 51: 5413-5424.

4Zhiqiang Gao, Dawei Zhang, Xiaogang Li, Sheming Jiang, Qifu Zhang (2018) “Current status, opportunities and challenges in chemical conversion coatings for zinc”, Colloids and Surfaces A: Physicochemical and Engineering Aspects 546:221-236.

5G. Vourlias, N. Pistofidis, D. Chaliampalias, E. Pavlidou, P.Patsalas, et al. (2006)“A comparative study of the structure and the corrosion behavior of zinc coatings deposited with various methods”, Surface and Coatings Technology 200:6594-6600.

6Galvatech ’04 (2004) 6th Intl. Conf. on Zinc and Zinc Alloy Coated Sheet Steels, Chicago, USA.

7Thomas Lostak, Artjom Maljusch, Björn Klink, Stefan Krebs, Matthias Kimpel, et al. (2014) Wolfgang Schuhmann “Zr-based conversion layer on Zn-Al-Mg alloy coated steel sheets: insights into the formation mechanism”, Electrochimica Acta 137: 65-74.

8Chromating Abdullah Al Mamun, Aina Onoguchi, Giuseppe Granata, Chiharu Tokoro (2018) “Role of pH in green rust preparation and chromate removal from water”, Applied Clay Science 165:205-213.

9U.S. Patent 5,318,640. H. Ishii et al., (1994) assignors to Henkel Corp., Plymouth Meeting, Pa., “Surface treatment for zinc-coated steel sheet” Metal Finishing, Volume 93, Issue 4, April 1995, Page 93.

10(2018) ASTM B117 – 18, “Standard Practice for Operating Salt Spray (Fog) Apparatus”, ASTM International, USA. 03.02.

11N. Wint, A. C. A. de Vooys, H. N. McMurray (2016) “The corrosion of chromium based coatings for packaging steel”, Electrochimica Acta 203: 326-336.

12K. Raeissi, M. R. Toroghinejad (2008) “The effect of chromated and organic layers on corrosion resistance of galvanized steel sheets”, Progress in Organic Coatings 62:61-64.

13X. Zhang, W. G. Sloof, A. Hovestad, E. P. M. van Westing (2005) “Characterization of chromate conversion coatings on zinc using XPS and SKPFM”, Surface and Coatings Technology, 197:168-176.

14A. M Rocco, Tania M. C Nogueira, Renata A Simão, Wilma C Lima (2004) “Evaluation of chromate passivation and chromate conversion coating on 55% Al–Zn coated steel”, Surface and Coatings Technology 179:135-144.

15A Belghazi, S Bohm, J. H Sullivan, D. A Worsley (2002) “Zinc runoff from organically coated galvanised architectural steel”, Corrosion Science, 44:1639-1653.

16T Prosek, D Thierry (2004) “A model for the release of chromate from organic coatings, Progress in Organic Coatings 49:209-217.

17Vlastimil Kuklík, Jan Kudláček (2016) Hot-dip galvanized coating formation”, Hot-Dip Galvanizing of Steel Structures 29-39.

18A. Azimi, F. Ashrafizadeh, M. R. Toroghinejad, F. Shahriari (2012) “Metallurgical assessment of critical defects in continuous hot dip galvanized steel sheets”, Surface and Coatings Technology 206:4376-4383.

19S. T. Vagge, V. S. Raja, R. Ganesh Narayanan (2007)“Effect of deformation on the electrochemical behavior of hot-dip galvanized steel sheets”, Applied Surface Science 253:8415-8421.

20H. Asgari, M. R. Toroghinejad, M. A. Golozar (2009) “Effect of coating thickness on modifying the texture and corrosion performance of hot-dip galvanized coatings”, Current Applied Physics 9:59-66.

21Eiman Alibakhshi, Alireza Naeimi, Mohammad Ramezanzadeh (2018) “A facile synthesis method of an effective anti-corrosion nanopigment based on zinc polyphosphate through microwaves assisted combustion method; comparing the influence of Nano pigment and conventional zinc phosphate on the anti-corrosion properties of an epoxy coating”, Journal of Alloys and Compounds 762:730-744.

22T.Biestek and J.Weber (1976) Conversion Coatings, Portcullis Press Limited- Redhill, Surrey, 1st Edition.

23Shigeyoshi Maeda, Masahiro Yamamoto (1998) “The role of chromate treatment after phosphating in paint adhesion”, Progress in Organic Coatings 33:83-89.

24(1995) U.S. Patent 5,318,803. June 7, 1994 H.R. Bickford et al., assignors to International Business Machines Corp., Armonk, N.Y., “Conditioning of a substrate for electroless plating” Metal Finishing 93:93.

25(2005) “Corrosion Protection Properties of Organofunctional Silanes—An Overview”, Tsinghua Science & Technology 10:639-664.

26W.V.Ooij, M.Stacy, V.Palanivel, A.Lamar and D.Zhu (2002) “The Use of Organofunctional Silanes as a Major Constituent in Organic Coatings for enhanced Corrosion Protection”, 13th IFHTSE Congress/International Surface Engineering Congress, Columbus, Ohio, 7:1-9.

27Thomas Lostak, Christian Timma, Stefan Krebs, Jörg Flock, Stephan Schulz (2016) “Organosilane modified Zrbased conversion layer on Zn–Al alloy coated steel sheets”, Surface and Coatings Technology 305:223-230.

28F. J. Shan, C. S. Liu, S. H. Wang, G. C. Qi (2008) “Corrosion resistance of hot dip galvanized steel pretreated with bis-functional silanes modified with nanoalumina, Acta Metallurgica Sinica (English Letters) 21:245-252.

29W. Trabelsi, E. Triki, L. Dhouibi, M. G. S. Ferreira, M. F. Montemor (2006) “The use of pre-treatments based on doped silane solutions for improved corrosion resistance of galvanised steel substrates”, Surface and Coatings Technology 200:4240-4250.

30Thomas Lostak, Christian Timma, Stefan Krebs, Jörg Flock, Stephan Schulz (2016) “Organosilane modified Zrbased conversion layer on Zn–Al alloy coated steel sheets”, Surface and Coatings Technology 305:223-230.

31H. H. Sheu, H. B. Lee, S. Y. Jian, C. Y. Hsu, et al. (2016) “Investigation on the corrosion resistance of trivalent chromium conversion passivate on electroplated Zn–Ni alloy”, Surface and Coatings Technology 305:241-248.

32Robert Berger, Ulf Bexell, T. Mikael Grehk, Sven-Erik Hörnström (2007) “A comparative study of the corrosion protective properties of chromium and chromium passivation methods”, Surface and Coatings Technology 202:391-397.

33A Barbucci, M Delucchi, G Cerisola (1998) “Study of chromate-free pretreatments and primers for the protection of galvanised steel sheets”, Progress in Organic Coatings 33:131-138.

34Indumathi S.N, T. Vasudevan, S. Sundarrajan, B. V. Subba Rao, C.V.S.Murthy D.R.Yadav (2011) “Cadmium- and chromate-free coating schemes for corrosion protection of 15CDV6 steel”, Metal Finishing 109 :15-21.

35Gang KONG, Jintang LU, Haijiang WU (2009) “Post treatment of silane and cerium salt as chromate replacers on galvanized steel”, Journal of Rare Earths 27:164-168.

36G.D.Wilcox and D.R.Gabe (1998) “Chemical Molybdate Conversion Treatments for Zinc”, Metal Finishing 71-74.