Table 1

Table 2

Table 3

Figures at a glance

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

Table 1

Materials	Trade code	Density(gr/cm3)	Viscosity(cP)	EEW or AHEW
Resin	RenLam 5138	1.14	1850	206.74
Hardener	Aradur 5052	0.94	50	108.45

Table 1: Main properties of resin and hardener.

Table 2

Materials	Purity (%)	Molecular Mass(gr/mol)	Melting point ()	Boiling point ()	Density (gr/cm3)
DBP	99	-	-35	340	1.043
BA	99	108.14	-15	205	1.05
1,4BDDGE	-	202	-	-	1.1

Table 2: Main properties of diluents

Table 3

								Viscosity(cP)
				BA(phr)				DBP(phr)				BDDGE(phr)
Time(min.)	0		5	10	15		5	10	15		5	10	15
0	720		540	430	270		440	430	310		370	300	250
25	804		550	550	280		520	505	380		510	380	300
50	1200		855	1000	650		825	710	540		620	441	365
85	1849		1960	2100	1360		1320	1110	900		770	580	496

Table 3: Viscosity of prepared composites versus time

FIGURE 1

Figure 1:Effect of types and concentrations of diluents on the viscosity of composites

FIGURE 2

Figure 2:Effect of diluents on gel time

FIGURE 3

Figure 3: Effect of different diluents on the contact angle of prepared composites A (without any diluents), B (DBP), C (BA), D (BDDE)

FIGURE 4

Figure 4:Types and concentrations of diluents versus cross-linking percentage

FIGURE 5

Figure 5:Water absorption (at 30) versus diluents

FIGURE 6

Figure 6:Water absorption (at 100℃) versus diluents